Junkyard Gem: 1978 Toyota Hilux

Murilee Martin


See Full Image Gallery >>

Toyota sold plenty of small pickups prior to the Hilux's introduction in 1968, including the old-timey Stout and cartrucks based on the Crown and the Corona. The Hilux ended up being one of Toyota's all-time most legendary vehicles in company history, if not the most legendary, in large part due to its reputation for durability in low-intensity conflicts around the globe. You can still buy a brand-new Hilux, though not in North America; the commute-friendlier Tacoma replaced the commercial-grade Hilux starting with the 1995 model year here. While the first-generation Hiluxes could be purchased on our shores (and some were), the 1973-1978 second-gen trucks were the ones that really established Toyota as a major truck player in the American market. Here's one of those trucks, a very worn-out '78 in a Denver-area car graveyard.

Toyota stuck with the Hilux/Hylux name in North America into the 1973 model year, at which point the name of this truck became, simply, the Toyota Truck. Just as most American owners of Volvo Amazons no longer use the official North American name (the 122S) for their cars, so do most owners of Toyota Trucks now deploy the Hilux name for their trucks.

We can feel confident that final owner of this Truck called it a Hilux, if we are to judge by this sticker on the rear glass.

At the Truck's heart, the amazingly reliable (unless you try to race it) 20R 2.2-liter four-cylinder engine. 90 horsepower, available at truck-like low revs. This engine also went into the Celicas of the era, where it seemed out of place in a sporty car. I keep hearing that owners of Trucks with later 22Rs clean out all of the 20R cylinder heads from junkyards (because you get better flow and higher compression with that swap), but I see plenty of 20R heads during my junkyard travels.

5-speeds weren't particularly exotic by 1978, but Toyota was proud that Truck buyers could get them that year.

Did it still run when it took that final tow-truck ride to this place? I'll bet it did.

The biggest problem with the Truck, as with most Japanese vehicles of the 1970s, was its susceptibility to corrosion. The Rust Monster doesn't work as quickly in Colorado as it does in, say, New Hampshire or Wisconsin, but it will consume a Truck if given enough time. At some point in the recent past, someone tried to fix the rot with patch panels and body filler, which never buys much time.

How many miles on it? No way to tell with this 5-digit odometer.

Someone personalized the cab ceiling with many stickers. Surprisingly for a Denver-area junkyard vehicle, I didn't find any stickers from breweries or cannabis dispensaries.

Hugs not drugs!

If you can find a better-built truck, buy it. Hey, didn't Lee Iacocca say something similar, a few years later?

It's strange to see the second-gen Trucks looking so shiny and new, since just about every single example you see now has been working hard for at least 42 years.

This New Zealand Hilux commercial is for the following generation, but it's worth watching regardless.


More From

  • 2021 Kia Telluride Nightfall Edition is a stealthy appearance package

    The Kia Telluride has made quite the splash here in the U.S. The stylish, versatile and well-equipped crossover won the hearts of much of the Autoblog staff, as well as those of buyers. Now, going into its second model year, the 2021 Telluride gets a broody appearance package full of black elements with the Nightfall Edition. The Nightfall Edition will be available on the EX AWD trim equipped with the premium package, as well as the SX AWD and SX Prestige package.

  • 2021 Ford Bronco Sport trim breakdown | How the five trims differ

    Just like its larger cousin and its many and varied trims, the 2021 Ford Bronco Sport is available in a multitude of configurations. Jeep has dipped its toe into a similar thing with its crossovers, but Ford is taking a page straight out of the big Bronco with its trim lineup for the Bronco Sport. In total, there will be five trims available at launch: Base, Big Bend, Outer Banks, Badlands and First Edition.

  • Porsche starts testing 3D-printed pistons, gains 30 horsepower in a 911 GT2 RS

    Automakers are experimenting extensively with 3D printing for all variety of automotive parts from simple interior trim pieces to parts as complex as brake calipers. Porsche is taking the technology a step further by experimenting with 3D-printing engine internals. Mahle, a German parts supplier, and Trumpf, a 3D printer manufacturer, helped Porsche make 3D-printed pistons that can survive in a high-performance engine.

  • Lightning strikes behind the grille of Maserati's first hybrid model

    Maserati's first production-bound hybrid powertrain will be inaugurated by the Ghibli, its entry-level model. Posted on its official Facebook page, the 10-second-long video shows the front end of a Ghibli with blue lightning crashing across its grille, a feature that will presumably not be available on the production car. Although it doesn't reveal the hybrid's final design, let alone what's behind the grille, the flick confirms the gasoline-electric Ghibli will not look drastically different than the gasoline-only model.