Engineer’s face beams with nerd pride after making a working lightsaber

Is there anything purer than the look of pride on a nerdy engineer’s face when he realizes he’s created a working lightsaber model? The answer to that question is “no,” as a new video posted by electrical engineer Allen Pan will demonstrate.

FROM EARLIER: Why Martin Shkreli is the best corporate villain of all time

I highlighted Pan’s work earlier this year when I wrote about his brilliant replica of Thor’s hammer that he designed to make it seem like only he could lift it. (In reality, he equipped it with a high-powered electromagnet that was connected to a fingerprint scanner that would only shut off when his thumb touched it.)

This time, he’s back with a lightsaber replica that uses a nichrome ignition system to shoot a beam of fire straight up into the air from the device’s hilt, which is filled with a methanol/acetone fuel mixture. To make the device super nerdy, Pan even equipped it with a tiny microphone that lets out a lightsaber sound effect whenever he turns it on. After all, if you’re going through the trouble of making a real lightsaber, you don’t want to leave out any important details.

In the video, Pan admits that wielding the device is a little bit scary, which is understandable since he’s basically holding a three-foot-tall column of fire in his hands. But his face… ah, his face is just priceless.

Check out the while video below.

Related stories

What critics said about the original 'Star Wars' movie back in 1977

What you need to know before seeing 'Star Wars: The Force Awakens'

Watch Jimmy Fallon and the cast of 'The Force Awakens' sing a Star Wars medley

More from BGR: Boeing 777’s insane landing in a 75MPH windstorm is almost too unnerving to watch

This article was originally published on BGR.com