— Recommendations are independently chosen by Reviewed’s editors. Purchases you make through our links may earn us a commission.
This week, millions in Texas are reeling from a historic cold front that has left damage across the state. Beyond the widespread rolling power outages, many residents are also experiencing flooding emergencies due to freezing pipes.
While local plumbing and restoration experts are working hard to assist homes in Texas communities, the demand is at an all-time high.
David Crow, General Manager of Benjamin Franklin Plumbing of Arlington, Texas, says, “Plumbing companies are swamped with phone calls.”
In the event of such a plumbing disaster or even a natural disaster such as a hurricane, you may be faced with flooding water in your home that you need to address—fast.
Whether you’re dealing with a recently burst pipe or the aftermath of a flood, here’s what you should do to clean up before a professional service arrives.
Subscribe to Reviewed's Resources newsletter for tips, tricks and hacks to get through this together.
If a pipe bursts, shut off your water immediately
If you see the first signs of a pipe burst like leaking or flooding, newly formed puddles or water stains, or a change in water pressure in your faucets, act fast and turn off your home’s water.
Wilkinson says your priority should be locating the shut-off valve by your home’s water meter. In many cases, the water meter is located in the basement or outside beneath a water meter grate.
Courtney Wilkinson, Crow’s colleague and Benjamin Franklin Plumbing vice president, recommends, “If you don’t have a key, use some sort of tool [to open] where you can shut it off.” You can grab a water key from a local hardware store, but if that’s not an option, try using pliers or a screwdriver to get it open.
If your water meter has frozen over due to cold temperatures, don’t panic. You can try to circulate warm air from your home into the room where your water meter is located. But, if nothing gives, you may have to wait for a plumber to get out to your home to help.
Turn off your home’s power and gas
You may have seen viral photos from the Texas cold snap like icicles hanging from a ceiling fan. Instances like this where water leaks through electrical systems connected to fans, light fixtures, or even electrical outlets can be a dangerous situation.
To be safe, Crow recommends turning off your home’s power before starting any clean-up. “You [don’t want to be] searching around water that can come in contact with an electrical source,” he says. You should also shut it off even if you’re experiencing a power outage, as there is always a possibility the power may suddenly return.
If you do have to enter standing water to access your home’s main power switch, the CDC recommends calling in an electrician to turn your power off to avoid any risk of injury.
The experts at Bob Vila also recommend shutting off your gas supply if you have gas appliances in your home. Find your home’s gas valve and shut off the main gas line to shut off all appliances. If you can’t access your gas line safely, it’s best to call in an expert to do so for you.
Call in an expert ASAP
When you’re dealing with a flooded home, you’ll need an emergency plumbing service to assist in evaluating the plumbing damage done in your home. It’s best to call a service immediately to minimize the damage done, especially if your community is experiencing widespread damage and service is in high demand.
Wilkinson says, “Water can damage a house very fast, and it doesn’t take a lot to make a lot of damage.”
Crow also recommends immediately contacting a clean-up and restoration service. Water damage restoration services can help evaluate and fix the damage caused by prolonged water exposure.
It’s also important to know that if your home is not dried out within 22-48 hours, the EPA says you should assume there is mold growth happening in your home.
At this point, cleaning up may become dangerous to do on your own, as mold exposure can lead to irritation, allergic reactions, and even infection in people with weakened immune systems. In this case, consult a qualified professional to inspect and restore the damage in your home.
Wear proper protective gear if you have it
It’s important to keep yourself protected while cleaning, especially if there’s a chance that you may be exposed to mold or mildew.
The EPA recommends donning protective gear before cleaning up your home. If you have safety goggles and any sort of heavy-duty rubber gloves, go ahead and put those on. Wear work boots if you have them.
While N95 respirator masks are still scarce amid the pandemic, if you do have one or can get access to one, wear that as well to avoid inhaling contaminants that breed in standing water.
If your home is flooding to the point where you believe you or others could be in danger, evacuate.
Begin clearing out standing water
First, focus on getting as much standing water out of the house as possible. Try to get the house as clean and dry as possible before the 22-48 hour period that can cause mold and mildew growth is up.
If the water is only in a portion of your home, your goal is to keep it from spreading to other rooms, especially if you have wood floors and you’re worried about water getting underneath the flooring, says Crow.
If you have power, use a wet-dry vacuum (otherwise known as a shop vac) to extract the water from floors, carpets, and hard surfaces. If your home has a sump pump, this will automatically help push water and moisture out of your home.
If your power is out, you’ll still want to try to remove the water quickly, so it’s time to get a little creative with your clean-up method.
Crow says, “Use anything that’ll absorb water—all the towels you have, comforters off your bed, anything like that.”
Crow also recommends using a mop to soak up as much water as possible. If you’re able to get to a hardware store, you can pick up a squeegee to physically push the water out towards your garage or porch.
Try to dry out what’s most susceptible to water damage
As we’ve mentioned, water damage happens fast. For this reason, Crow and Wilkinson recommend determining the areas of your home that you believe need to be protected from water damage.
“Anything with a porous surface is going to soak water up—this includes sheetrock, baseboard, and wood,” says Wilkinson. Focus your water-cleaning efforts on materials like this first. If you can save some or most of your flooring or walls from encroaching water, that is a best-case scenario.
For materials like sheetrock, also known as drywall, if the water damage isn’t significant, restoration service Restoration Local recommends using a wet-dry vacuum. It could potentially cause some damage on the walls, but it’s better than having to completely replace your drywall. You can also use large towels to blot the walls and collect moisture.
If significant water damage from heavy flooding occurs, your drywall most likely won’t make it. At this point, experts recommend punching out holes to allow water and moisture to escape since the damaged drywall will need to be replaced regardless.
Throw away what can’t be dried
After removing as much water as possible from the home, begin to evaluate the damage done to your furniture and personal items. Creating two piles—one for salvageable items and another for stuff you just need to toss.
Paper products, food, and electronics that are water-damaged will most likely need to be thrown away. Upholstered furniture and rugs may be able to be restored or cleaned, but will require attention from an expert quickly.
Get expert shopping advice delivered to your phone. Sign up for text message alerts from the deal-hunting nerds at Reviewed.
Prices were accurate at the time this article was published but may change over time.
This article originally appeared on Reviewed: How to clean up water in your home