Save Time and Money: 6 DIY Phone Cases You Can Make in Under 10 Minutes
Face it, we all have the urge to change our phone cases like we change nail polish colors, but affordable *and* cute cases can be hard to come by (especially for those of us without iPhones!). When you’re in need of a phone case facelift, look no further than these DIYs. We’re bringing you our six favorite ways to decorate clear phone cases, plus printable case templates to make your own designs. Here’s another bonus — each method takes less than ten minutes! So keep calm and scroll on for some major case revamps.
PRINTABLES
Materials
– clear iPhone 5S, iPhone 6 or HTC One case (we found ours for cheap on Amazon)
– phone case template
– card stock
– X-acto knife
– cutting mat
Instructions
1. Download and print out our iPhone 5S, iPhone 6 or HTC One templates here.
2. Cut out each template with an Xacto knife on a cutting mat.
3. Place inside the phone case. Voila!
Let’s kick it off with the smartest way to decorate your phone case for those of you with accessory ADD — printables! Download our iPhone 5S, iPhone 6 and HTC One templates, then print them out on card stock.
Cut those babies out with an X-acto knife on a cutting mat.
Take special care when you’re cutting out the camera hole, especially if your blade is a touch dull.
Place your printable in the phone case. You’re done!
ACRYLIC PAINT
Materials
– clear iPhone 5S, iPhone 6 or HTC One case
– acrylic paint
– painter’s tape
– paint brush
– Q-tip
Instructions
1. Add a strip of tape to the inside of your clear phone case.
2. Using acrylic paint, paint one color below the tape and one color above on the inside of the phone case (not the outside!).
3. Let dry and paint one more coat so the paint is opaque.
4. Clean up the sides and openings with your finger or a Q-tip to ensure there is no paint on the outside of the case.
5. Once the paint is completely dry, take off the strip of tape. All done!
The secret trick to this DIY? Paint the *inside* of the phone case to ensure the paint won’t scrape off over time. If we painted the outside of the case, we’d have to paint over it with a sealant or Mod Podge.
Using acrylic paint, paint one color below the tape and one color above. Let dry, then paint one more coat so that the paint is opaque.
Touch up the edges and openings with your finger or a Q-tip to ensure that no paint gets on the outside of the phone.
When completely dry, peel off the tape. That’s it!
Pastel perfection.
PAPER CUT-OUTS
Materials
– clear iPhone 5S, iPhone 6 or HTC One case
– case template
– colored paper or card stock
– school glue
– clip art or illustrations (you can download ours here)
– paintbrush
– X-acto knife
– cutting mat
Instructions
1. Download our phone case template and print the last page on colored paper or card stock.
2. Using an X-acto knife, cut out your template.
3. Cut out your printed illustrations or clip art. Paint glue onto the back of these illustrations, then glue them to your template.
4. Once dry, fit the template into your phone case.
First up, print out the last page of our phone case template onto colored card stock or paper.
Cut out the template using an X-acto knife, paying special care to the camera and mic holes.
Cut out your illustrations in the same fashion. We used our design guru Rosee’s adorable illustrations.
Paint a dollop of school glue onto the back of each cut-out, then press onto your template. Let dry.
Seriously, it doesn’t get any easier than this. The possibilities really are endless….
