It’s hard to find a better way to keep kids cool on a hot summer day than having a water slide or a slip-and-slide. The problem, of course, as most parents quickly learn, is that the even the Slip ‘N Slides are usually either just way too short or too cheaply made. In fact, Slide ‘N Slides are so poorly made that they fall apart after only a couple slips and slides. And considering these things are usually no more than a fancy piece of plastic ⏤ that can cost as much as $150 ⏤ you can’t help but wonder, why don’t I just make a slide myself. How hard can it be, right?
The answer is: Not at all. You just need to be a little brave. Pretty much anybody can build a massive slip-and-slide that dwarfs almost any other off-the-shelf Slip ‘N Slide. You just need a roll of thick plastic, a few tent stakes or garden staples, and a water hose. It takes about 30 minutes to an hour and, depending on the size, should cost around $50 to $60. Here’s how you do it. Step, by step. (Do these steps in order! Don’t slip or slide ahead of yourself!)
What You’ll Need:
- A 10-foot by 100-foot roll of heavy 6 mil plastic from the local hardware store or Amazon. Obviously, you can go smaller in size but the amount of fun is directly proportional to the length and width of the plastic, remember that. Whatever you do, though, don’t buy thinner plastic ⏤ it tears more easily and that defeats the entire purpose of building your own slide. Also, black plastic gets hot. White is more expensive. And clear may kill your lawn. You decide which color is a bigger drawback.
- One 10- to 12-foot long two-by-four board
- Garden staples and/or tent stakes
- Garden hose or lawn sprinkler
- Bottle of baby shampoo
- Optional: Drill, hammer, and a large pool noodle
Find the Perfect Spot
Obviously, the size of your slide depends on the size of your yard. We recommended a 100-foot piece of plastic ⏤ because that makes for a long, fun glide ⏤ but if a plastic sheet that long cuts across three of your neighbor’s lawns, go smaller (or roll it up). Nonetheless, you’re looking for the longest stretch of open grass, preferably on a hill, you can find ⏤ the steeper the incline, the wilder the ride. That said, a flat surface usually works just fine ⏤ even better when you add a little baby shampoo to the water.
No matter the spot, though, the most important thing you can do is remove any rocks, sticks, or obstructions from the full length of the glide path. Walk it once, twice, three times, whatever it takes to ensure nobody smashes mid-slide into a tree root hidden underneath.
Unroll the Plastic & Secure the Ends
After picking a spot, unfurl the plastic sheet and straighten. Make sure it’s stretched taut and the wrinkles are smoothed out. You have two options for securing the slide:
- The easiest is simply to stake down all four corners with tent stakes or garden staples, bunching the plastic a little to keep it from tearing every time somebody hits the slide. Garden staples are nice because they have slightly rounded tops and leave no exposed metal. Tent stakes, on the hand, extend deeper and may provide a more secure hold ⏤ just make sure they’re hammered all the way down so that nobody accidentally gets cut.
- The second way to secure the slide is to roll the end of the plastic around a two-by-four board, which is then secured into the ground with two metal tent stakes. This method provides the most secure hold for the top of the slide. Simply lay a 10- to 12-foot board along the edge of the plastic sheet. Wrap the plastic around the board several times and pull tight. Now drill a hole on each side of the board and hammer a tent stake through each so it doesn’t move. Similarly, some people like to wrap the bottom of the slide in a giant pool noodle to help slow down the sliders when they hit the end.
Add Water and Shampoo
With the slide in place, you’re just about ready to go. Either set up sprinkler(s) along the runway or turn the hose on at the top of the slide and run the water until it’s completely soaked. Depending on the desired speed of the slide, have the kids do a couple of test runs to see how fast the surface is. If it’s too slow, simply pour some baby shampoo the length of the plastic. Not only is it an effective lubricant, but it’s better for the environment than, say dish soap, and it won’t burn the kid’s eyes.
Seriously, that’s it. Line the kids up and let them go wild. Just remember: One rider at a time and no standing, dammit!
- Young Boy Starts El Paso Challenge in Response to Mass Shooting
- Foot Exercises for a Stronger Foundation
- These Are the Most Common Arguments Married Couples Have
- How To Subscribe to Disney+ Before It Starts Streaming
The post How to Build an Insane Backyard Slip ‘N Slide in 3 Easy Steps appeared first on Fatherly.